BDYML - MIL-P-24441/3 FORM. 152,COMPONENT A
- MSDS: BDYML
- Manufacturer: KOPPERS CO INC
- Product Name: MIL-P-24441/3 FORM. 152,COMPONENT A
- National Stock Number: 8010-00-421-2435
Product Identification
Product ID:MIL-P-24441/3 FORM. 152,COMPONENT A
MSDS Date:01/01/1985
FSC:8010
NIIN:00-421-2435
Kit Part:Y
MSDS Number: BDYML
Responsible Party
VERNON, CA 90040
US
Cage: LO335
Contractor
Cage: LO335
Ingredients
POLYAMIDE
Fraction By Weight: 19.0%
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 31.0%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:IRRITATION TO EYES,NOSE,& THROAT ABOVE
TLV.SEVERE VAPOR CONCENTRATIONS MAY CAUSE DEATH.
First Aid
First Aid:REMOVE TO FRESH AIR, RESTORE BREATHING IF NECESSARY. CALL
DOCTOR.SKIN:WASH WITH WATER AND SOAP. EYES: FLUSH WITH WATER FOR 15
MIN. SEE DOCTOR. WASH CLOTHERS AND SHOES BEFORE REUSE. INGESTED:DO
NOT IND UCE VOMIT.
Fire Fighting
Flash Point:99 F, 37 C, PMCC
Extinguishing Media:FOAM,DRY CHEMICAL,WATER-SPRAY, FOG OR CO*2
Fire Fighting Procedures:USE AIR SUPPLY FOR ENCLOSED AREAS.COOL CANS
WITH WATER
Unusual Fire/Explosion Hazard:KEEP AWAY FROM HEAT, SPARKS OR OPEN
FLAMES.
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES.AVOID BREATHING
VAPORS, VENTILATE AREA, CONTAIN AND SCOOP UP SPILLS WITH
NON-SPARKING TOOLS,RAGS.USE INERT ABSORBENT MATERIALS ON SMALL
SPILLS OR RESIDUAL OF LARGE SPILLS.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED. AVOID FLAMES,
WELDING, SMOKING,SPARKS,OPEN LIGHTS.AVOID BREATHING OF VAPOR OR
SPRAY MIST.AVOID SKIN & EYE CONTACT.
Other Precautions:SEVERE CONCENTRATIONS OF VAPOR IN AIR MAY CAUSE
EXPLOSION. DO NOT USE IN CONFINED AREAS, TANKS OR PIT WITHOUT
ADEQUATE VENTILATION.
Exposure Controls
Respiratory Protection:ORGAIC VAPOR CANISTER. IF VAPOR CON. >2% USE AIR
FACE MASK.
Ventilation:LOCAL EXHAUST OR MECHANICAL
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Supplemental Safety and Health
KEY1:F4.
Chemical Properties
HCC:F4
Evaporation Rate & Reference:< N BUT ACET.
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE VISCOUS LIQUID WITH TYPICAL PAINT ODOR
Percent Volatiles by Volume:55.0
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:DISPOSE OF IAW LOCAL APPLICABLE REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.